Manual
– TopCon TC.LAE
Installation and commissioning
39 / 56
2016-06-08
6.2.7.
Emptying the coolant from the device
Possible harm by the coolant !
Danger of serious damage to health by prolonged exposure through
inhalation and if swallowed:
Possible damage to organs (H373).
Possible damage to the fertility or
possible harm to a child in womb (H361).
Avoidance:
Pay attention to the warning signs on the device.
While handling with coolant, open doors and windows and
ensure the room is well ventilated also on the ground level.
Use the personal protective equipment at existing
concentrations of vapour and aerosols. E.g. the respiratory
protection and protective cloves which are resistant against
solvents.
Close coolant vessels immediately.
6.2.7.1.
Checklist for emptying the coolant from device
Prepare the fill-up set
refer to chapter 6.1.2, page 26.
Prepare the filling block
refer to chapter 6.2.6.2, page 34.
Mount the filling hoses
refer to chapter 6.2.6.3, page 35.
Pump out the coolant expansion reservoir,
refer to chapter 6.2.6.4, page 36.
Check the coolant level in the expansion reservoir,
refer to chapter 6.2.6.5, page 38.
Remove the filling hoses,
refer to chapter 6.2.6.3, page 35.
Fasten the Allen screws in the filling block
refer to chapter 6.2.6.2, page 34.
Keep the material.
CAUTION
