Regan Scientific Instruments BOT-3000E, Operating Manual

Page: 23 / 29

21
BOT3000E On-Screen Messages

"ABORTED BY USER" - Measurement stopped by user.

"ARCHIVE DELETED" - Deleting of archive complete.

"ARCHIVE xxx of yyy" - Archiving files that have been transfered to USB.

"BLUETOOTH TRANSFER" - Transfering data or files via bluetooth.

"CALIB. DUE IN xxx DAYS" - Calibration expiration approaching.

"CALIB. PAST DUE xxx DAYS" - Calibration past due.

"CAMERA COMM FAILURE" - Unable to communicate with camera.

Return to factory for repair

"COMMAND FAILED" - Couldn't communicate with slider crypto chip.

"CREATING REPORT" - Creating A326.3 PDF report.

"DEAD BATTERY" - Battery is essentially dead. Unit will turn itself off.

"DELETING ARCHIVE" - Deleting files from archive.

"DELETING xxx of yyy" - Deleting files from archive.

"DETACHING USB" - Un-installing USB stick after removal.

"DO NOT REMOVE USB" - USB in use, do not remove.

"ERROR: DELTA > 0.06" - Slider offset out of range.

"FILE ERROR" - Unable to create the PDF.

"INCOMPLETE xxx of yyy" - Error in the transfering of files to USB.

"INSERT SLIDER" - Tried to take a measurement without a sensor inserted.

"INSTALLING USB" - USB was detected and is being initialized.

"INVALID SLIDER" - Wrong sensor type for selected standard.

Insert the correct sensor for the desired test method

"LOADING DATA" - Loading previously saved A326.3 data.

"LOW BATTERY" - Battery is low but will still take a measurement.

"MAIN DETECT ERROR" - Unable to communicate with crypto on main board.

"MEAS. TIMEOUT" - Measurement did not complete in time (likely because unit did not drive
forward)

"NO DATA TO PRINT" - No measurements have been taken to print.

"NO FILE SYSTEM" - Unable to detect internal file system.

"NO USB STICK" - No USB stick inserted.

"OUT OF PAPER" - Printer out of paper.

"PRINTER ERROR" - Unable to communicate with printer.