IF THE CHARGER CANNOT REMAIN PLUGGED IN DURING LONG TERM
STORAGE, DISCONNECT BATTERY CABLES.
To Return the Stored Vehicle to Service
Fully charge the Batteries. See Batteries, Page 22.
Readjust tire pressure to 18-20 psi (124-138kPa).
Perform the Pre-Operation Checklist. See page 10.
Maintenance
Read DANGER and WARNING on Page 7.
GENERAL INFORMATION
To ensure trouble-free vehicle performance, it is very important to follow an established
preventive maintenance program (regularly scheduled service, even though the vehicle
is functional). Regular and consistent vehicle maintenance can prevent vehicle
downtime and expensive repairs that result from neglect. Any vehicle not functioning
correctly should be removed from use until it is properly repaired. This will prevent
further damage to the vehicle and avoid the possibility of injury due to unsafe conditions.
Contact your local SoloRider distributor/dealer to perform all repairs and semi-annual
and annual periodic service. See the following WARNING.
•
IF PROBLEMS ARE FOUND DURING SCHEDULED INSPECTION OR SERVICE, DO
NOT OPERATE THE VEHICLE UNTIL REPAIRS ARE MADE. FAILURE TO MAKE
NECESSARY REPAIRS COULD RESULT IN FIRE, PROPERTY DAMAGE, SEVERE
PERSONAL INJURY, OR DEATH.
•
HOT!
DO NOT ATTEMPT TO SERVICE HOT MOTOR OR CONTROLLER.
ATTEMPTING DO SO COULD CAUSE SEVERE BURNS.
Daily Pre-Operation Safety Checklist
Inspect and drive the vehicle, using the Pre-operation Checklist (Page 10) and
Performance Inspection (Page 10) as a guide to check the following items.
Vehicle warning decals
Parking brake
Reverse warning buzzer
Steering and linkages
Proper acceleration and maximum speed
Batteries
Accelerator switch
In addition, check the items listed below:
20
Summary of Contents for 330100001101
Page 8: ...8...
