Ensure that the drive belt is set to the 33
1/3
RPM setting on the pulley.
Connect the turntable interconnect between the
TTPSU
and the turntable.
Make sure the PS1 mains transformer is plugged in and connected to the 24V AC input
terminal in the back of the
TTPSU
. Switch the mains power on.
Push the power button on the front panel to turn the TTPSU on - When the power supply
is switched on, the Rega logo will illuminate RED, This indicates that 33 rpm is selected.
To change to 45RPM press the 33/45 button, this will turn the Rega logo to GREEN and
will select 45 rpm.
To select 33
1/3
RPM press the button again and the Rega logo will return to RED.
PLEASE NOTE: When using the TTPSU always leave the belt in the
top position as illustrated.
33
1/3
RPM
45 RPM
