D
Once the wheel is in place and tight, turn the bike the right way up. Squeeze the brakes together until there is a 1mm gap
betwen the brake pads and the rim. Both sides should be equal. Whilst holding in place you then need to pull the brake
cable tight, and tighten the brake cable pinch bolt by turning clockwise using the spanner provided as shown.
i
ii
iii
1mm
1mm
CORRECT BRAKE & WHEEL FITTING IS VERY IMPORTANT FOR YOUR SAFETY
IF YOU HAVE ANY PROBLEMS THERE IS MORE INFORMATION IN THE USER MANUAL
SHOULD YOU HAVE ANY DOUBT REGARDING THE BRAKES YOU SHOULD
CHECK WITH A QUALIFIED BICYCLE MECHANIC
FAILURE TO CORRECTLY SET THE BRAKES MAY RESULT IN SERIOUS INJURY
9