9
7: General operations
Note:
Maybe there is some difference between the preview image and
saved image, please subject to the image that you saved in SD card.
♦ Quick Start
1. If you want to scan the films, please switch two switches on the top of
the device to the left side. Otherwise if you want to scan the photos,
please switch to the right side.
2. Put Slide/Negative onto the Slide/Negative Holder or insert photo into
appropriately sized photo tray (5”x7” (5R), 4”x6” (4R), 3
½
”x5” (3R),
name card)
3. Insert the Slide/Negative Holder into the slot on the right of the device
or insert photo tray into photo tray slot from the top of the device.
4. Apply the power to the film & photo scanner by two ways:
(1) USB: Connect the film & photo scanner to PC with USB cable
(2) 5V adapter: Connect the adapter to the device with USB cable
5. Press POWER button to turn on the film & photo scanner.
Note:
(1) When the Film scanner mode is selected, the Film scan
indication LED is on. (2) When the Photo scanner mode is selected, the
Photo scan indication LED is on.
6. Follow the menu on screen for scanning.
7. After finished the scanning, take out the memory card.
Note:
The film & photo scanner has a built-in memory for recording,
when there is a memory card inserted, it will be the top priority for
saving data.
8. Or read pictures from PC by USB mode
9. When capturing in either photo or film modes, please remember to
push both slide switches to the correct placement.
A notification will appear on-screen as a reminder to carry out the
following:
2. Film: push both sliders to the left.
1. Photo: push both sliders to the right
