Installation Instructions
Sidewinder
TM
Turret
Part Number:
61302
Turret Shown Assembled With Arm
Equipment Required:
Wrenches:
15/16”
Drill Bits:
Not Required
Torque Wrench
INDEX
1. GUIDELINES FOR MATCHING WING SET
P. 1-2
2. ASSEMBLY INSTRUCTIONS
P. 2
3. LIMITED LIFETIME WARRANTY
P. 3
2009, 2014 Cequent Performance Products, Inc - Printed in Mexico
Sheet 1 of 3
61302IN
5-28-14
Rev. C
j
Qty. (1)
Turret 61302 (Formally ST300)
k
Qty. (1)
Upper Wear Plate
l
Qty. (1)
Bushing
m
Qty. (1)
Hardware Kit
Fastener Kit:
61302F
Do Not Exceed Lower of Towing Vehicle Manufacturer’s Rating,
Trailer Manufacturer’s Rating or
Max Gross
Trailer WT (LB)
Max Pin
WT (LB)
16,000 LB
3,200 LB
Form: F205 Rev A 5-6-05
DEALER/INSTALLER:
(1) Provide this Manual to end user
END USER:
(1) Read and follow this Manual for Sidewinder Turret Installation.
(2) Save this Manual for Future Reference.
(3) For Sidewinder Arm Installations, Refer to Arm Installation Manuals.
(4) Pass on copies of Manual to any other users or owner.
WARNING:
Failure to follow all of these instructions may result in death or serious injury!
Figure 1
4
2
3
1
Note: These Instructions Are Only For Installation Of Turret Into Wing Sets.
You Should Refer To The Installation Instructions For Your Sidewinder Arm.
Figure 2
For Wing Set Make and Model Numbers:
Venture CJ13515
Venture CJ13517
Venture CJ20517
M-Tec RVPN1409 (Note Rating)
Use The Bolt Hole Locations Noted By The “A”
The pattern is a 8” horizontal & a 1 1/2” vertical
Trailer Forward
Matching Wing Sets
