7
•
Make sure there are no other operational infrared transmitters such as wireless headphones within the
range of the remote control. Always check if simultaneously operated IR transmitters do not interfere with
your model.
•
Conduct regular checks to verify that the model and remote control are safe to use. Inspect the parts
for any signs of damage, such as broken connectors or damaged cables. All moving parts on the model
should move freely, but there must not be any slackness in the bearing.
•
Check that the rotors are secure and in the correct position before each use.
•
The quadrocopter rechargeable battery required for operation must be charged before use.
•
Always ensure that the non-rechargeable batteries in the transmitter have enough remaining capacity
(see transmitter LED). If the batteries are empty, replace all of them at the same time. Never replace
individual batteries.
c) During use
•
Do not take any risks when using the product! Always use the model responsibly, otherwise you may
endanger yourself and your surroundings.
• Improper use can cause serious injury and damage to property! Ensure that you maintain a sufficient
distance from people, animals and objects.
• Only fly the model when you are fully alert and able to respond. Fatigue, alcohol and medication can affect
your ability to respond.
• Artificial light sources or strong sunlight can interfere with the transmission of IR control signals and
significantly reduce the remote control range (normally approx. 10 m).
•
Keep objects and body parts away from the rotors when the rotors are moving.
• Do not fly the model towards spectators or towards yourself.
• Never try to grab hold of the flying quadrocopter with your hands.
•
Motors, motor controllers and the quadrocopter rechargeable battery can become hot during operation.
For this reason, take a 5 to 10 minute break before recharging the quadrocopter rechargeable battery or
restarting the quadrocopter with a spare rechargeable battery.
•
Always leave the remote control (transmitter) switched on when the model is in use. After landing, always
switch off the quadrocopter before you switch off the remote control.
•
Never switch the transmitter off during operation while the quadrocopter is still running.
•
Do not expose the model or the remote control to direct sunlight or excessive heat for prolonged periods.
•
In the event of a severe crash (e.g. from a high altitude), the electronic gyro sensors may be damaged.
Always check that the model is functioning properly before flying it again!
•
In the event of a crash, switch off the rotor motors immediately. Rotating rotors may be damaged if they
come into contact with obstacles or in the event of an impact. Check the rotors for any signs of cracks or
damage before flying the model again!
•
To avoid damaging the model due to a crash caused by an undervoltage/total discharging of the recharge-
able battery, monitor the undervoltage indicators during the flight.
Summary of Contents for TQ Performance Drone RtF
Page 1: ...Operating Instructions Electric Quadrocopter TQ Performance Drone RtF Item No 1934146 ...
Page 30: ...30 ...
Page 31: ...31 ...
