8
b)
Before first use
•
You must learn how to use and control remote-controlled quadcopters. If you have not driven such models
before, proceed with caution and learn how the model reacts to remote control commands. Be patient!
• Ensure that there are no other models on the same frequency (2.4 GHz) within range of the remote
control. Always check whether there are any other 2.4 GHz remote control systems that may interfere
with the model.
•
Conduct regular checks to verify that the model and remote control are safe to use. Inspect the model
for any signs of damage, such as broken mechanical parts (e.g. rotors).
•
All moving parts on the model should move freely, but there must be not any slackness in the bearing.
•
Check that the rotors are secure and in the correct position before each use.
•
Charge the battery in accordance with these instructions.
• Ensure that the remote control batteries have sufficient power remaining (use a battery tester). If the
batteries are empty, replace all of the batteries at the same time. Never replace individual batteries.
c) During use
•
Do not take any risks when using the model! Always use the model responsibly, otherwise you may
endanger yourself and your surroundings.
• Improper use can cause serious injury and damage to property! Ensure that you maintain a sufficient
distance from people, animals and objects.
• Select a suitable location to fly the quadcopter. Familiarize yourself with the local regulations for using
model aircraft.
• Only fly the model when you are fully alert and able to respond. Fatigue, alcohol and medication can
affect your ability to respond.
•
Keep objects and body parts away from the rotors when the rotors are moving.
• Do not fly the model towards spectators or towards yourself.
•
The motors, electronics and battery may heat up during use. Leave the quadcopter to cool down for 5-10
minutes before charging the battery.
•
Always leave the remote control turned on when the model is in use. After landing, move the on/off switch
on the quadcopter to the "OFF" position, and then switch off the remote control.
•
In case of a fault or a malfunction, establish the cause of the problem before using the model again.
•
Do not expose the model or the remote control to direct sunlight or excessive heat for prolonged periods.
•
In the event of a severe crash (e.g. from a high altitude), the electronic gyro sensors may be damaged.
Always check that the model is functioning properly before flying it again!
•
In the event of a crash, switch off the rotor motors immediately. Rotating rotors may be damaged if they
come into contact with obstacles or in the event of an impact. Check the rotors for any signs of cracks or
damage before flying the quadcopter again!
•
To avoid damaging the model due to a crash caused by an undervoltage/overdischarging of the battery,
monitor the undervoltage indicators during the flight.
•
Do not exceed the maximum range stated in the "Technical data" section of these instructions. The range
is 50% lower when the quadcopter is controlled with a smartphone instead of the remote control. If the
quadcopter goes out of range, you will not be able to control it and it will continue to fly until it crashes!
This will void the warranty.
Summary of Contents for Rocket Drone FPV
Page 1: ...Operating Instructions Electrical quadrocopter Rocket Drone FPV RtF Item No 1646409 ...
Page 41: ...41 ...
Page 42: ...42 ...
Page 43: ...43 ...
