background image

6

5. Product description

The "Rocket Drone FPV" quadcopter is a pre-assembled quadcopter with four rotors and a built-in camera. Quadcop-

ters are already used professionally to complete a wide range of tasks. The outrigger arms on the four rotors can be 

folded inwards. This makes the quadcopter easy to transport.
The "Rocket Drone FPV" quadcopter features the latest microprocessor-driven electronics with altitude control and 

accelerometers, which stabilize its position and altitude. It also features a built-in camera for live transmission, which 

enables you to fly the quadcopter in "FPV" mode ("first person view"). You can also control the quadcopter with your 

smartphone and record images and videos.
The quadcopter features high-quality, powerful DC motors with a specially developed drive. An innovate control sys-

tem and electronic self-stabilization make the quadcopter easy to control.

This product is designed for use in large, enclosed rooms/areas, but can also be used outdoors in still conditions. 

The built-in electronic controls (gyroscope) can balance out small undesired changes to the quadcopter's altitude, 

but cannot prevent them altogether. The quadcopter reacts sensitively to wind/draughts due to its lightweight design.
The remote control requires 4 AA batteries (not included).

Summary of Contents for Rocket Drone FPV













































Reviews: