52
A=A
Propeller A
Propeller B
Propeller B
Propeller A
B=B
Front
Fig. 25
• Use the supplied screwdriver and gently loosen the screw in clockwise direction for propeller A and in
counterclockwise direction for propeller B.
• Then remove the propellers from the motor shaft.
•
Match the “D” shape on propellers to the flat side of the indicated “D” gap on motor shafts when assembling the
new propellers. See Fig. 26.
• Gently tighten the screw in counterclockwise direction for propeller A and in clockwise direction for propeller B.
“D” Gap
Counterclockwise
Clockwise
Tighten the screw
Fig. 26
Loosen the screw
Propeller A
Propeller B
Propeller B
Propeller A
Clockwise
Counterclockwise
Make sure the propellers are in the correct position, otherwise the drone will not fly properly.