Reely ROAD 234000, Operating Instructions Manual

Page: 51 / 124

51
b) Programming the Special Functions
The speed controller is already programmed with the best pre-settings in the factory. Usually, no changes
are required for the first attempts at driving.
Green LED flashes...
Red LED flashes .... (+ Beep)
(+ Beep)
1x short
2x short
3x short
4x short
1x long
1x long, 1x short
1x long, 2x short
1x long, 3x short
1x long, 4x short
1
Drive function
1x short
Forwards/brake
Forward/braking/ reversing
Forward/ Reverse
2
Motorbrake
2x short
0%
5%
10%
20%
40%
60%
80%
100%
3
Undervoltage protection
3x short
Off
2.6V/cell
2.8V/cell
3.0V/cell
3.2V/cell
3.4V/cell
4
Starting mode
4x short
1 (slow)
2
3456789
(fast)
5
Maximum braking
strength
1x long
25%
50%
75%
100%
6
Max. reverse speed
1x long, 1x short
25%
50%
75%
100%
7
Minimum braking strength
1x long, 2x short
= Motorbrake
0%
20%
40%
8
Neutral range
1x long, 3x short
6%
9%
12%
9
Timing
1x long, 4x short
0.00°
3.75°
7.50°
11.25°
15.00°
18.75°
22.50°
26.25°
10
Overheating protection
2x long
+95°C
Off
11
Rotational direction of the
motor
2x long, 1x short
Counter-clockwise rotation
Clock-wise rotation
12
Number of LiPo cells
2x long, 2x short
Auto
2 cells
3 cells
4 cells
5 cells
6 cells
Function
The speed controller unit has many different programming
options, e.g. adjustment of the braking strength, a low-voltage
protection function for LiPo rechargeable batteries and many
more.
The values marked grey in the table are the settings pre-
programmed ex works (at the time these operating
instructions were written). However, these may change for
later versions of the speed controller.
The function (see „Function“ column in the table to the left)
currently selected for settings is always indicated by the green
LED.
The value selected is indicated by the red LED (see right
area of the table).
The following pages explain how to activate the programming
mode and how to make settings; they also describe all the
functions.