manualshive.com logo in svg

Reefe 20586, Exploded View & Instruction Manual

Share
Download
Reefe 20586 Exploded View & Instruction Manual Download Page 7

www.

reefe

.com.au

Ascento Group Australia

© 

AI.062020

P: 1800 807 604

© Ascento Group Australia, 2020. IMPORTANT NOTICE: 

These diagrams are a guide only, it is the owners responsibility to ensure that the installation 

is carried out in accordance with applicable Electrical and Plumbing Standards and Local Council Regulations, and that the product is suitable for their 
purpose of use. Warranty does not include rectification of incorrect installation and/or problems caused by incorrect installation.

IMPORTANT - 

DO NOT EXPOSE THE PUMP DIRECTLY TO THE ELEMENTS. 

WE RECOMMEND THE PUMP IS PROTECTED WITH A PUMP COVER. 

IMPORTANT 

CONSIDER 

NEIGHBOURS WHEN 

INSTALLING THE PUMP. 

ALL PUMPS MAKE 

SOME NOISE.

!

IMPORTANT!  

ENSURE THE 

PUMP IS SIZED CORRECTLY 

FOR THE JOB. TOO SMALL 

= LOW PERFORMANCE AND 

MAY USE EXCESS POWER, 

AND/OR OVERHEAT THE 

MOTOR AND/OR CAUSE 

PREMATURE FAILURE. 

THIS IS NOT A WARRANTY 

FAULT IF THIS OCCURS. 

!

DIAGRAM 12

DIAGRAM 13

DIAGRAM 14

WRONG!

WRONG!

THERE IS 

NO COVER!

RIGHT!

WITH 

COVER!

DIAGRAM 15

PIPEWORK MUST 

ALIGN WITH PUMP! 

STRESS ON THE 

PUMP DUE TO THE 

PIPEWORK BEING 

CROOKED WILL LEAD 

TO FAILURE OF THE 

PUMP THAT IS NOT 

COVERED BY 

WARRANTY. 

!

WRONG!

Summary of Contents for 20586













Reviews:

No comments

Brands by name

Popular brands

Load more brands