Thermo view device manual
11/11
may disrupt the temperature measurement process. Wait for a while until the device shows
the right water temperature.
Remember that apart from the temperature sensor the device is not entirely
watertight and it must not be submerged in the liquid.
8. Resetting the device.
If your device does not work properly, or you want to repeat the setup procedure, or you
cannot connect to it despite several attempts, you may restore it to its default settings by
placing a magnet (included in the package) at the right side of its housing.
Tip: move the magnet from the left to the right side of the device, to make it possible for the device
to detect its presence. The device will indicate the beginning of the resetting process by emitting
three sound signals and a short sound.
9. Connect to your Internet network via a computer or a mobile device. Next, go to
Smart Reef
account. Check, if your device has
been properly added to the list of your devices. You can change its name and assign it to
one of your aquariums. The serial number of your device and its firmware version are
displayed in the lower right corner of the screen. Our devices are SMART; therefore, we
constantly improve them. From time to time, you will receive information about firmware
updates that will make your device work even better.
10. Notice the icons located in the upper right corner of the screen. They make it possible to
change the language, view the history of notifications registered by the device, contact us
and access many more interesting features offered by the device.
11. Additional and up-to-date information about the device, its operation and setup can be
, in the relevant product tab.
