reedinstruments
www
com
1
Data Hold
This is a function used to freeze the reading on the display,
ideal for later viewing.
1. Press the
HOLD
button once. When the Hold is activated, the meter
beeps, freezes the reading, and displays the “
HOLD
” indicator on
the LCD.
2. To deactivate the “
HOLD
” function, press
HOLD
button once, the
meter will beep and the meter will start reading a new measurements.
Peak Hold
This is a function used to record the maximum and minimum readings on
the display for the voltage and current ranges.
1. Press the
pEAK
button once. This will record The “
pEAK
” maximum,
the meter beeps, and display the “
p MAX
” indicator on the LCD.
2. Press the
pEAK
button again. This will record the “
pEAK
” maximum,
the meter beeps, and display the “
p MIN
” indicator on the LCD.
3. To deactivate the “
pEAK
” function, press the button for 3 seconds, the
meter will beep and the meter will start reading new measurements.
LCD Backlight
The backlight is ideally used in dark or dimly lit areas.
1. Press the
button for 3 seconds, and the bright white light
will come on.
2. To turn off the backlight press the
button for 3 seconds.
Note: The use of the backlight will reduce the battery life considerably.
For service on this or any other REED product, contact REED Instruments