reedinstruments
www
com
14
Frequency Measurement
1. Set the function switch to
range position.
The meter automatically defaults to Frequency range.
2. Press the
MODE
button for 3 seconds to select the Frequency range.
The meter automatically defaults to DC Volts.
3. Insert the red test lead into the “
V Ω TEMP HZ
” input terminal and the
black lead to the “
COM
” terminal.
4. Connect the other end of the test leads to the circuit or component
under test. Take the reading on the display.
Note:
• In the Frequency range the meter is Auto Ranging only.