6
0722-50323
RG6 Portable Roll Groover
Roll Grooving Tips
1. If pipe tends to “walk off” drive shaft, increase lateral offset
of pipe (see “Pipe Set-Up”, Step 5).
2. If Cover Plate shaves end of pipe, decrease lateral offset of
pipe.
3. If pipe end flare is excessive, lower pipe end to level with roll
groover.
4. If pipe wobbles and/or “walks off” Drive Shaft, raise pipe end
to level with roll groover.
5. Short lengths of pipe (under three feet) may require slight hand
pressure to maintain the lateral offset.
Figure 1. RG6 Roll Groover
