Figure 19
16.
Turntable is turned on by pressing
appropriate turntable speed button (33 or
45). Then:
a)
red LED 0 goes off and green LED
turns on next to selected speed
button (Figure 19),
Figure 20
b)
platter rotation stability is
indicated by steady green-lit hole
pattern (Figure 20)
c)
if platter does not start to move or
its rotation is obstructed, after 5
seconds turntable turns off; if
rotation speed is unstable, both
green and red speed LEDs are on at
the same time.
Figure 21
17.
Tonearms (one or two) are mounted by
using protractor (Figure 21).