Figure 10
c)
check if Belt / Friction switch is
set to Friction position, if not –
set it to Friction (Figure 10).
Figure 11
10.
When ordering belt drive option (Figure
11):
a)
check if levers of both motors are
securely fastened by transportation
screws (red caps); if not, fasten it by
hand
b)
take a belt from the box and put it on
the pulleys of both motors and the
drive wheel (Figure 11)
Figure 12
c)
check if Belt / Friction switch is set to
Belt position, if not – set it to Belt
(Figure 12).
Link to view how to change transmission
options from belt to drive (and opposite):
https://www.youtube.com/watch?v=ijYZlNEBO
60