Figure 17
17.
Bearing lubrication (Figure 17). Lubricate
bearing every half year (when you get
new Reed turntable the bearing is
lubricated):
a)
Remove platter;
b)
Unscrew screw from top of spindle. Use
Torx key TX10 (included in package);
c)
Push ball down with syringe needle and
inject not more than 2 drops of oil
(included in package);
d)
To remove air from bearing: push
bearing down by hand and push ball
down with needle through screw hole.
Do not release bearing;
e)
Hold bearing pushed down and tighten
the screw;
f)
Put back platter on turntable.