Figure 9
9.
Put the platter on the turntable axis
(Figure 9).
Figure 10
10.
By adjusting turntable feet up or down,
set the turntable to a horizontal position
(Figure 10).
After mounting a tonearm, please check
turntable’s horizontal position once again. If
turntable features electronic level
(inclinometer) and speed indicator, follow
chapter 12a.
Figure 11
11.
Attach power supply to a socket (Figure
11) and:
a) plug into a power socket:
- 220V – 240V, 50Hz or
- 110V – 130V, 60Hz (on request).
b) if Reed Source 12V power source is
used – connect it according to
instructions in
Reed Source 12V
user
manual.
c) if you’ll be using Reed 5T tonearm, you
may power both tonearm and turntable
from a single power source. Filtered
power supply cable should be connected
to a tonearm.