reedinstruments
www
com
6
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Operating Instructions
1.. Ensure.that.the.DC.9V.battery.is.connected.correctly
2.. Select.the.correct.function.and.range.before.taking.measurements.
3.. Select.the.proper.measurement.range.by.starting.at.the.highest.
anticipated.value
4.. Place.the.test.lead.into.the.proper.input.terminal.before.taking.
measurements
5.. Remove.the.test.leads.from.the.circuit.under.test.when.changing.
the.measurement.range
6.. Operate.the.instrument.only.in.the.ambient.temperature.range.of.
32.to.122°F.(0.to.50°C).and.less.than.80%.Relative.humidity
7.. Do.not.exceed.the.maximum.rated.voltage.of.each.range.and.
input.terminal
8.. Always.turn.the.instrument.off.when.not.in.use
9.. Remove.the.battery.if.the.instrument.will.not.be.used.for.a.long.
period.of.time
AC Watt Measurement
1.. While.the.LOAD.is.OFF,.turn.the.meter.ON.
2.. Determine.the.highest.anticipated.WATT.(2000W.or.6000W)..
on.the.function.scale.and.press.the.corresponding.button
3.. Connect.the.test.leads.into.their.appropriate.terminals..
(see.Instrument.Description).
4.. Connect.the.LOAD.to.the.LOAD.test.leads.
5.. Adjust.the.Watt.Zero.Adjust.Knob.until.the.display.shows.“0”.
6.. Power.on.the.LOAD.and.the.meter.will.display.the.true.watt.value
7.. Press.the.Function.Switches.to.change.between.ACV.(AC.Voltage).
or.ACA.(AC.current).measurements
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com