reedinstruments
www
com
8
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Sensitivity Adjustment
This unit provides two levels of sensitivity. When the unit is switched
ON it is set to high sensitivity by default. To change the sensitivity, press
the
Lo
Sensitivity
button. The two left green LED’s will then flash indicating low
sensitivity has been selected. To switch the unit back to high sensitivity,
press the
Hi
Sensitivity
button. The two right red LED’s will then flash indicating
that high sensitivity has been selected.
Sensor Replacement
To ensure the accuracy of the unit, the sensor must be replaced periodi-
cally. This unit’s sensor has a limited operative period and under normal
operation it should stay operative for over a year. To prolong the sensor’s
life-cycle ensure that the sensor’s surface is free from water droplets,
vapor, oil, grease, dust and any other form of contaminant as well as any
exposure to high density coolants (>30000ppm).
WARNING
When replacing the sensor, the old sensor may be very HOT.
1. Remove the sensor protector cover from the tip of the sensor
probe
2. Pull out the old sensor and insert the new sensor into the plug
(see below)
3. Place the sensor protector over the new sensor
Cleaning
This plastic housing can be cleaned with isopropyl alcohol or standard
household detergents. Do not allow any cleaner to enter the unit or to
come into contact with the sensor as it may cause damage. Gasoline and
any other solvents may damage the plastic and should be avoided.
WARNING: The detergent or isopropyl alcohol could damage the sensor,
be sure to keep them from the sensor when cleaning the unit.
1.888.610.7664
REED-Direct.com