15
Selecting the Temperature Unit of Measure (t-CF)
Follow steps 1 through 3 when "t-CF" appears on the LCD.
1. Press the and buttons to select between °C and °F.
2. Press the
ENTER
button to confirm selection.
3. Press the
SET
button to save and skip to the next parameter.
Note
: At any time, you can press the
ESC
button to exit the Setup mode
and resume normal operation.
Setting Alarm Value for CO
2
Follow steps 1 through 3 when "AL" appears on the LCD.
1. Press the and buttons to adjust the CO
2
alarm value.
2. Press the
ENTER
button to confirm selection.
3. Press the
SET
button to save and skip to the next parameter.
Note
: At any time, you can press the
ESC
button to exit the Setup mode
and resume normal operation.
Advanced Setup Mode (CO
2
mode only)
Setting CO
2
Height Compensation Value (m)
Follow steps 1 through 3 when "HIgh" appears on the LCD.
1. Press the and buttons to adjust the CO
2
height compensation
value ranging from 0 to 8900 meters.
2. Press the
ENTER
button to confirm selection.
3. Press the
SET
button to save and skip to the next parameter.
Setting CO
2
Height Compensation Value (ft)
Follow steps 1 through 3 when "HIghF" appears on the LCD.
1. Press the and buttons to adjust the CO
2
height compensation
value ranging from 0 to 2930 feet.
2. Press the
ENTER
button to confirm selection.
3. Press the
SET
button to save and skip to the next parameter.
ESC
Press the
SET
button when "ESC" appears on the LCD to exit the Setup
mode and resume normal operation.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
