10
Humidity/Temperature Measurement Mode
1.
Select the "rH" function (see
Selecting
Measurement Modes
for details).
2.
The top part of the display will leave the humidity
value, and the lower part of the display will show
the temperature value as shown.
Dew Point Measurement Mode
1.
Select the "dP" function (see
Selecting
Measurement Modes
for details).
2.
The top part of the display will indicate the Dew
Point value while the lower part of the display will
indicate "DEW" as shown.
Wet Bulb Temperature Measurement Mode
1. Select the "_Et" measurement mode (see
Selecting Measurement Modes
for details).
2. The LCD display will indicate the wet bulb value
as shown.
Note
: The wet bulb value is automatically calculated
from the humidity/temperature measurement.
CO/Temperature Measurement Mode
1.
Select the "CO" function (see
Selecting
Measurement Modes
for details).
2. The top part of the display will indicate the CO
value in PPM, and the lower part of the display
will show the temperature value as shown.
O
2
/Temperature Measurement Mode
1.
Select the "O
2
" function (see
Selecting
Measurement Modes
for details).
2. The top part of the display will indicate the O
2
%
value, and the lower part of the display will show
the temperature value as shown.
continued...
%RH
DEW
PPM
CO
%
O
2
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com