9
www.REEDInstruments.com
Reference Point Setting
The default reference point setting is from the bottom
of the meter. Press the
button to toggle between
the bottom and top reference points of the meter. A
beep will emit whenever the reference setting
is changed.
Note:
The meter does not automatically save the
selected reference point when turned off.
Setting the Unit of Measure
Hold the
button to toggle between units of measure while in a
measurement mode. The default unit of measure is 0.000m. There are a
total of 4 selectable units.
Measurement Units
Length
Area
Volume
0.000m
0.000m²
0.000m³
0.00m
0.00m²
0.00m³
0.0in
0.00in²
0.00ft³
0 1/16 in
0.00ft²
0.00ft³
0'00" 1/16
0.00ft²
0.00ft³
0.00ft
0.00ft²
0.00ft³
Distance, Area, Volume, Pythagorean,
Cumulative and Regressive Measurement
Single Measurement
Press the
button in measurement mode to emit laser and lock
the measurement point. Press the
button again for single distance
data measurement. Measurement result will be displayed on the main
display area.
continued...
www.
GlobalTestSupply
.com
Find Quality Products Online at:
