12
www.REEDInstruments.com
Indirect Measurement 3
1. Press the
button 5 times.
2. The hypotenuse of
will
flash on the display.
3. Press the
button to
measure the length of the
dotted hypotenuse (a) as indicated on the LCD display.
4. Press the
button to measure the length of the other dotted
hypotenuse (b) as indicated on the LCD display.
5. Press the
button to measure the length of the dotted
base-side (c) as indicated on the LCD display.
6. The meter will automatically calculate the length of the leg (x).
Indirect Measurement 4
1. Press the
button 6 times.
2. The hypotenuse of
will flash
on the display.
3. Press the
button to
measure the length of the
dotted hypotenuse (a) as indicated on the LCD display.
4. Press the
button to measure the length of the dotted
base-side (b) as indicated on the LCD display.
5. Press the
button to measure the length of the other dotted
hypotenuse (c) as indicated on the LCD display.
6. The meter will automatically calculate the length of the leg (x).
Note:
In the Pythagorean measurement mode, the length of the right-angle
side must be less than the hypotenuse, or a calculation error will be
shown on the display. To ensure measurement accuracy, measurement
must be taken from the same starting point followed by the hypotenuse,
then the angle side.
b
a
x
bc
a
x
b
c
a
x
b a
x
b
a
x
bc
a
x
b
c
a
x
b a
x
continued...
www.
GlobalTestSupply
.com
Find Quality Products Online at:
