3
Introduction
Thank you for purchasing your REED R5800 Voltage/Current Simulator.
Please read the following instructions carefully before using your instrument.
By following the steps outlined in this manual your meter will provide years
of reliable service.
Product Quality
This product has been manufactured to meet stated product specifications.
If a certificate of calibration is required please contact the nearest authorized
REED distributor or authorized Service Center. Please note an additional fee
for this service will apply.
Safety
To prevent the user and the instrument from electric shock and other
hazards, it is necessary to follow the following regulations:
• Never attempt to repair or modify your instrument. Dismantling your
product, other than for the purpose of replacing batteries, may cause
damage that will not be covered under the manufacturer's warranty.
Servicing should only be provided by an authorized service center.
• Do not operate the instrument in the presence of flammable or explosive
gas or vapor. This is extremely dangerous.
• Never apply more than 30V between any two terminals, or between
terminal and ground.
• For optimal accuracy, allow the instrument to warm up for 5 minutes
before operating.
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
