12
4. Reinstall the compartment lid by ensuring that battery terminals
touch the unit's contact points and snap into place.
5. Tighten the screw to secure the battery compartment door.
Ensure battery door is closed and secure in place before
using the meter. To ensure proper operation, wait 5 seconds
before turning meter on after changing batteries.
Fuse Replacement
1. Remove the test leads from the meter and turn the meter OFF.
2.
Take off the protective boot (Figure 1), remove the four screws by using
a standard-blade screwdriver, and then remove the cover (Figure 2).
3. Replace the blown fuse(s).
4. Reinstall the cover.
5. Reinstall the meter's protective boot.
Figure 1
Figure 2
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
