10
5.
The display will indicate "SA" followed by "End" and resume normal
operation when calibration is complete.
Note:
"SA" will not appear if the meter fails calibration.
Battery Replacement
When the low battery icon appears on the LCD, the batteries must
be replaced.
1.
Loosen both screws using the included Allen Key from the battery
compartment cap.
2.
Remove the battery compartment cap.
3.
Replace the four (4) "AAA" batteries.
4.
Secure the battery compartment cap back using the two (2) screws.
Electrode Replacement
1.
To remove the electrode, unscrew (Counter-Clockwise) and
completely remove the electrode collar.
2.
Gently pull the electrode module to disconnect it from the meter rock
the electrode from side to side, pulling it downwards, until it
disconnects from the meter.
3.
Carefully plug the replacement electrode into the meter socket,
ensuring proper connection.
4.
Tighten the electrode collar back into place.
Applications
• Water conditioning
• General purpose pH measurement
• Aquariums
• Wastewater monitoring
• Beverage production
www.
GlobalTestSupply
.com
Find Quality Products Online at:
