METHVEN
AURAJET AIO RAIL SHOWER
INSTALLATION INSTRUCTIONS
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
Care and Cleaning
We recommend the use of soapy water or approved cleaners. This product should not be cleaned with abrasive materials.
Damage caused by improper treatment is not covered by the product warranty – refer to warranty conditions on the last page.
A filter washer should be installed in the hose cone on the water outlet and it should be cleaned periodically.
If shower performance is compromised by the build-up of lime-scale, clean by using a soft toothbrush and gently scrubbing
along the spray slot under running water.
Step 1
•
Wall lining hole should be cut or finished as per the dimension shown in the diagram on the right
•
Cut off the threaded nipple 13±2mm from the wall lining and apply thread seal tape to ensure a
good seal.
Elbow Installation:
13±2m
m
26mm max
Step 2
•
Screw the elbow onto the nipple ensuring that the o-ring is sufficiently compressed to create a
watertight seal.
•
Ensure that the elbow is oriented vertically with the outlet oriented downwards.
Step 3
•
Connect hose to elbow and handset
•
Ensure swivelling cone is connected to the handset
Handset
Flat
Washer
Swivelling
Cone
page 3 of 4
