by
OPEN SKY DESIGN
ISSY
GLIDE VANITY UNIT
CLEANING RECommENDATIoNs
Open Sky Design vanity tops are a high grade acrylic Solid Surface with a semi gloss finish. It is recommended that this Solid
Surface top is protected during installation.
Your vanity should be cleaned with a mild, non acidic, non abrasive detergent and soft cloth. Finish by cleaning off detergents
with a soft damp cloth and towel dry. Always clean spills and water as they occur.
T
he Solid Surface top should be cleaned using a soft damp cloth with warm water OR a non abrasive ammonia based
household cleaner OR a dedicated counter top cleaner. The possibility of concentrated acidic ingredients present in some
beauty and cleaning products may damage the surface if left for a long duration. Citrus or silicone based sprays or polishes
should not be used . It is recommended that all spills are cleaned up as they occur.
Abrasive cleaners should NOT be used on this semi gloss surface. Damage caused by any improper treatment is not covered by
the product warranty.
To see the complete ISSY range go to
www.reece.com.au/bathrooms
sPECIFICATIoNs
Height
300mm For Glide 750, 1200 and 1500
320mm For Glide 1750 (double basin)
Width
500mm
Length
750mm, 1200mm, 1500mm (single basin) or
1750mm (double basin)
other size options
750 Single Drawer Can Be Customised 751 - 850mm
1200 2 Drawer Can Be Customised 1000 - 1300mm
1500 2 Drawer Can Be Customised 1400 - 1499mm
1750 4 Drawer, Double Basin Can Be Customised
1751 - 2000mm
Colour Variations
Satin or Gloss
(
White
)
Metallic Silver Gloss or Metallic Charcoal Gloss
Oak drawer fronts with matte clear finish, satin white
base and end panels
Fixing
Bolted / Screwed to Wall by a Licensed Trades
Person
Vanity Unit material
2 Pack Polyurethane on HMR MDF
Disclaimer:
Products in this specification manual must by regulation be installed by licensed and registered
trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from
their range without prior notification.
Dimensions are nominal measurements only.
Dimensions and set-outs
listed are correct at time of publication however the manufacturer/distributor takes no responsibility for
printing errors.
Tech Page Version
3
FEATUREs
Basin Type
One Piece Intergrated Top and Basin
Basin Configuration
Left Hand Basin or Right Hand Basin
Door/Drawer Design
Push to Open or Sensor (powered)
Number of Drawers
750
1 Drawer
1200
2 Drawer
1500
2 Drawer
1750
4 Drawer
Taphole
Configuration
0 or 1 Taphole
mounting
Wall Hung
Vanity Top
White Only Solid Surface Moulded Top And Basin
Features
Movable Solid Surface Drawer Divider
Removable and Washable Non Slip Drawer Mat
Choice of Metallic Colours
Option of Sensor Powered Drawers
Solid Surface Moulded Waste Cut Out in Basin
Drawer
Custom sizes
A Range of Customised Sizes Available
page 1 of 6
