background image

THE INFORMATION MODE/DEMO MODE

The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also al-
lows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.

To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:  

The Time/Incline/Segment
Time display will show the
total number of hours the
treadmill has been used. 

The Distance/Laps display
will show the total number of
miles (or kilometers) that the
walking belt has moved. 

An “E” for english miles or an
“M” for metric kilometers will
appear in the Speed/Min-
Mile display. Press the
Speed 

▲ 

button to change

the unit of measurement. 

IMPORTANT: The Calories/
Fat Calories/Heart Rate
display should be blank. 
If
a “d” appears in the display,
the console is in the “demo”
mode. This mode is intended
to be used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the displays and indicators on the console
will automatically light in a preset sequence, although
the buttons on the console will not operate. If a “d” ap-
pears in the Calories/Fat Calories/Heart Rate display
when the information mode is selected, press the
Speed 

button so the display is blank. 

To exit the information mode, remove the key from the
console.

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the 
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord.
CAUTION: You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the treadmill. 

1. Hold the treadmill with your hands in the locations shown

at the right. CAUTION: To decrease the possibility of
injury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your legs
rather than your back. 
Raise the treadmill about halfway
to the vertical position. 

2. Move your right hand to the position shown and hold the

treadmill firmly. Using your left hand, pull the latch knob to
the left and hold it. Raise the treadmill until the foot rail is
past the latch pin. Slowly release the latch knob. Make
sure that the foot rail is securely held by the latch pin.

To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of 
direct sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85° Fahrenheit.

1

Latch

Knob

Pin

Foot Rail

Closed

Open

2

23

Summary of Contents for RBTL69920
































Reviews: