background image

14

To stop the program temporarily, press the Stop
button. The Time/Segment Time/Pace display will
begin to flash. To restart the program, press the
Start button or the Speed 

s

s

button. To end the

program, press the Stop button, remove the key,
and then reinsert the key.

Follow your progress with the displays.

See step 5 on page 11. 

Measure your heart rate if desired.

See step 6 on page 12.

Turn on the fans if desired.

See step 7 on page 12.

When the program is finished, remove the key
from the console.

When the program has ended, 

make sure that

the incline of the treadmill is at the lowest set-
ting.

Next, remove the key from the console and

put it in a safe place.

Note: If the displays and

various indicators on the console remain lit
after the key is removed, the console is in the
“demo” mode. Refer to page 23 and turn off the
demo mode.

When you are finished using the treadmill, move
the on/off circuit breaker near the power cord to
the off position and unplug the power cord.

HOW TO USE HEART RATE PROGRAMS

Follow the steps below to use a heart rate program.

Note: You must wear the chest pulse sensor (see
page 8) to use a heart rate program.

Put on the chest pulse sensor.

See HOW TO PUT ON THE CHEST PULSE
SENSOR page 8. 

Insert the key fully into the console.

See HOW TO TURN ON THE POWER on page
11.

Select a heart rate program.

When the key is in-
serted, the manual
mode will be selected.
To select a heart rate
program, press the
Program Select button
repeatedly until one of the heart rate program indi-
cators lights.  

The two profiles on the left side of the LED matrix
show how the target heart rate will change during
the programs. During heart rate program 1, your
heart rate will reach approximately 85% of your
estimated maximum heart rate; during heart rate
program 2, your heart rate will reach approxi-
mately 80% of your estimated maximum heart
rate. Note: Your estimated maximum heart rate is
determined by subtracting your age from 220. For
example, if you are 30 years old, your estimated
maximum heart rate is 190 beats per minute
(220 – 30 = 190).   

3

2

1

7

6

5

4

CAUTION:

If you have heart prob-

lems, or if you are over 60 years of age and
have been inactive, do not use the heart rate
programs. If you are taking medication regu-
larly, consult your physician to find whether the
medication will affect your exercise heart rate.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for RBTL16921



































Reviews: