background image

15

HOW TO PLAY THE CALORIE DESTROYER GAME

The Calorie Destroyer game is a fast-paced game that
pits you against a squadron of laser-firing drones. In
addition to the console buttons, you will use the four-
button game controllers on the handlebar to play the
game. Follow the steps below to play the Calorie
Destroyer game. 

Begin pedaling or press any button on the
console to turn on the console.

A moment after you begin pedaling or press a
button, the display will light.

Select the Calorie Destroyer game.

To select the Calorie Destroyer game, press the
Fitness Games button repeatedly until the word
DESTROYER appears at the top of the display. 

Pedal to start the game.

When you start the Calorie Destroyer game, a
game arena will appear in the display. Three rows
of drones will begin to move across the top of the
arena, periodically firing their lasers downward.
Each time the drones reach the left or right side
of the arena, they will reverse direction and move
downward. 

At the bottom of the arena is a laser blaster. You
can fire the laser blaster at the drones by press-
ing the up button on either controller. In addition,
while you are pedaling, you can move the laser
blaster to the left or right using the left and right
buttons on either controller. The faster you pedal,
the faster the laser blaster will move. 

Between the drones and the laser blaster are five
shields. You can hide the laser blaster below a
shield if desired. However, each time a shield is
hit by a laser, a piece will be vaporized. 

Your goal is to keep the laser blaster from being
hit and to keep any drone from reaching the bot-
tom of the arena. If the laser blaster is hit, it will
be disabled and another laser blaster will appear
in its place; there are a total of four laser blasters.
If you vaporize the entire squadron of drones, a
new squadron will appear.

As you play, the drones will move faster and
faster. The game will continue until all four laser
blasters are disabled or a drone reaches the bot-
tom of the arena. 

When the game ends, the display will show the
level of play that you reached and your final
score. The display will then show the four highest
scores recorded since the scores were reset. If
desired, press and hold down the right button on
either controller to reset the scores. Note: If your
score is one of the four highest, the display will
prompt you to enter a name consisting of three
letters or digits. While the line below the first letter
is flashing, press the up and down buttons on
either controller to select the desired letter or
digit. Next, press the right button on either con-
troller and select another letter or digit. Repeat
this process to select a third letter or digit. Then,
press the right button on either controller again.
The display will then show the four highest scores
recorded since the scores were reset. 

Follow your progress with the display.

While you exercise and play the Calorie Destroyer
game, the upper left corner of the display will
show the elapsed time. In addition, the display will
show the game level that you have reached and
your current score.

To pause the game, press the Display button. To
resume the game, press the Display button
repeatedly until the word DESTROYER appears at
the top of the display, and then begin pedaling.

When you are finished exercising, the console
will turn off automatically.

See step 6 on page 12.

5

4

3

2

1

Summary of Contents for RBEX2976.1





















Reviews: