background image

Reebok i-Trainer.SE 

14

Customer Support 0800 440 2459

Reebok i-Trainer.SE

15

reebokfitness.info

These instructions are intended to provide important information for use and 
maintenance of the equipment as well as for your personal safety. Keep this 
user manual in a safe place for future reference.

WARNING! 

This product is made for home use only and tested up to a maximum body 
weight of 120kg.

RFE International Ltd. assumes no responsibility for personal injury or 
property damage sustained by or through the use of this equipment. It is 
the responsibility of the owner to ensure that all users of this equipment are 
adequately informed of all warnings and precautions.

SCOPE

•  Maximum user weight of 120kg.
•  This product is designed for physical exercise by adults. This product is not 

suitable for use by persons under 14 years of age.

•  Never allow more than one person on the equipment at a time.

ENVIRONMENT

•  Ensure that those present are aware of possible hazards e.g. moveable 

parts during training.

•  Ensure that sufficient space is available to use the product.
•  Please ensure that liquids or perspiration are wiped off the product.
•  This product is designed to be used and stored indoors. Do not store the 

product outside, or in damp/dusty environments.

•  The product is made for home use only. Warranty and manufacturer’s 

liability do not extend to any product or damage to the product caused by 
commercial use.

USER HEALTH

•  Consult your doctor before starting any exercise programme to receive 

advice on the optimal training.

•  Ensure the product is on a flat, level surface with at least 0.5m of clear area 

surrounding the product.

•  Incorrect/excessive training can cause health injuries.
•  If you feel sickness, chest pain, fits of dizziness or breathlessness during 

your training, immediately stop the training and consult your doctor. 

PRODUCT PREPARATION

•  Ensure that training only starts after correct assembly, adjustment and 

inspection of the product.

•  Follow the steps of the assembly instructions carefully.
•  Only use suitable tools for assembly and ask for assistance if necessary.
•  Only use original Reebok parts as delivered (see checklist).

SAFETY CHECKS (Before Every Use) 

•  Tighten all adjustable parts to prevent sudden movement while training.
•  Tighten all nuts and bolts.
•  Check that the tension knob is secure.
•  Ensure the product is on a flat, level surface.
•  Do not use the product without shoes or with loose shoes.
•  Be aware of non-fixed or moving parts whilst mounting or dismounting 

the product.

•  Do not wear loose or poorly fitting clothing that may become trapped in 

the product.

Precautions

RFE 4489_RE014201_iTrainerSE_UMFINAL.indd   14-15

25/06/2010   16:09

Summary of Contents for i-Trainer.SE



















Reviews: