background image

5

Thank you for selecting the revolutionary REEBOK

®

8700 ES treadmill with Universal Dock for iPod

®

. The

8700 ES treadmill with Universal Dock for iPod

®

offers

an impressive selection of features designed to make
your workouts at home more enjoyable and effective.
And when you’re not exercising, the unique 8700 ES
treadmill with Universal Dock for iPod

®

can be folded

up, requiring less than half the floor space of other
treadmills.

For your benefit, read this manual carefully before
using the treadmill

. If you have questions after read-

ing this manual, please see the front cover of this man-
ual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual. 

To avoid a registration fee for any service needed
under warranty, you must register the treadmill at
www.reebokservice.com/registration.

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

BEFORE YOU BEGIN

Handrail

Upright

Accessory Tray

Key/Clip

Reset/Off 

Circuit Breaker

Walking Belt

Cushioned Walking Platform 

Foot Rail

Power Cord

Rear Roller  
Adjustment Bolts

Console

Console Tray

Pulse Sensor

Summary of Contents for 8700 ES





































Reviews: