Set Present Time, and Day
(these only need to be set if you are using auto mode)
Program operation setting: If you want the heater to run every day at set times, and temperature, you
need to set the program operation first.
Setting sequence:
1. Current clock setting
: Press “
”for 3 seconds and the clock setting interface will be displayed.
(below pic 5)
The first two numbers = hours and they will flash.
Press the “ ” or “ ” buttons to set the present hour, then press “
” again the minutes will flash.
Press the button “ ” or “ ” to set the current minutes.
Note: The flashing will continue until you set the time, and if the heater is left, the heater will
automatically lock and continue to flash as a reminder, until you finish the setting.
2.
After setting the time, press the “
” button and enter into the current day selection.
Above Pic 7 shows default pre-programmed times.
D
efault pre-programmed temperatures for Anti Frost = 15 degrees and Comfort = 21 degrees.
1.Current time set
2. Day set (Mon.?)
3. Mode working time set
Pic 5
Pic 6
Pic 7
