REDT Miracle-A6, Instruction Manual

Page: 49 / 83

- 48 - MIRACLE-A6
Half Cut method means the method of manufacturinge the key with 1.5, which is between
1 and 2, or 3.5 which is between 3 and 4, when it is impossible to select either 1 and 2, or
3 and 4, or it means the method of manufacturing the key by using the structural
tolerance of the cylinder when the inside bitting of the cylinder is uncertain.
◈
How to enter Half Cut code
[Method 1]
1. Enter the bitting numbers in LCD screen.
2. Choose the number by use the [button].
3. Press button to convert to Half Cut Code. At this time, the half of the number becomes dark to
indicate it is to be half-cut.
4. If Half Cut key is pressed, .5 is automatically entered as default. At this time, you may change the number in
decimal point by pressing or button.
5. Press or [Enter] button to move to the next digit.
[Method 2 ]
1. Press button repeatedly and move to the next digit until you see the Half Cut Code you
want.
Whenever you press buttons, the Half Cut Code will be changed as following
1.5
→ 2.5 → 3.5 → 1.5 → …
2. Press or [Enter] button to move to the next digit.
Half Cut Method