3
What is RROSD-PRO V2 PDB?
RROSD PRO V2 is an easy to use power distribution board and OSD designed to maximize FPV
experience while minimizing mini quad build time and reducing the wire clutter mess!
Built-in features
Thick copper and wide power routing to handle the most demanding power setup
Dimension 36mm x 36mm (30.5mm x 30.5mm mounting holes)
Built-in power distribution regulators to handle 3S-6S
*note1
Built in multi stages power filter for Video Transmitter and Camera with pre-installed
and conveniently located connectors
12V and 5V output: can be used for FPV cam and accessories
NTSC and PAL can be easily selected using the onboard button
Plug and Play (PnP) OSD information: Flight pack voltage, current draw, total current
consumption, RSSI, flight timer, power statistic summary
Maximum motor current reading 150A total
Automatic flight timer shows actual flight time
The additional lost model buzzer sounds off 5 minutes after the quad has crashed.
RSSI detection (FRsky ppm and analog compatible) displays in percentage
Auto Battery alarm blinks the battery voltage when pack voltage hits the low limit
Low RSSI turns on Buzzer (very handy to locate a downed quad)
Onscreen menu allows user to calibrate pack voltage reading, current calibration, rssi
input, battery alarm level, screen location offset…etc....
Lost model Siren (optional Buzzer)
