Caution On use
• Never short-circuit the battery pack terminals.
• Never attempt to open the battery pack.
• Avoid mechanical shock.
• Please consult the store where you purchased this battery pack or
your sales representative before using the battery pack in a product
whose Operation Manual/Operating Instructions does not explicitly
state that the battery pack can be used, or before using the battery
pack in conjunction with another power supply. In appropriate use of
the battery pack may result in unit misoperation.
• The internal impedance of the battery pack increases as the
temperature drops to 5°C (41°F) or below. This may result in a shorter
operating time or the failure of the component to which it is connected
to turn on. This phenomenon occurs more frequently in battery packs
that have been charged many times than in new ones.
• The performance and operating time of the battery may drop under
cold conditions. When this happens, do the following to extend the
operating time of the battery pack:
- Charge the battery pack only with
REDPRO
charger
model RP-DC50
or any other model
dedicated to the RP-BP
85D
within a temperature
range of 10°C to 30°C (50°F to 86°F).
• Large discharge amount may expedite deterioration of battery pack’s
internal cells. To prevent this, use the RP-BP
85D
with discharger
amount of about 3 A or less.
• The maximum discharge amount is
3.5 A
for the RP-BP
85D
at 23°C
(73°F). Continuous use at levels beyond the maximum discharge level
may cause the protection circuit to shut off the current to protect the
Testing the capacity of the Battery pack:
-
The remaining capacity is indicated by a four-step Red LED Dysplay
- Press the Test / Check Button and the remaining Capacity of the
Battery Pack will be displayed on LED Dysplay ( more than 80%, 60%,
40%,below 20%)
F - more than 80% , E - below 20%
- If the Battery Pack is instilled on the Camcorder with function of
powering the camera, the LED Power Dysplay may not show exact
capacity status of the battery pack.
- When only one(E) LED indicates please recharge the battery as soon
as possible.
- The D-TAP DC Output socket can
be used as 14.4V DC output, or DC
charging input
- Open the rubber protective cover
with D-TAP sign on it.
- Plug in the D-Tap lead for DC
output, or for charging the battery .
-To keep D-Tap socket away from
dust close the D-Tap output with
rubber protective cover
- The Battery offers 5V/1A USB
Power Output for charging mobile
phones and all other units on USB.
- Open the rubber protective cover
with USB sign on it.
- Plug in the USB lead and connect
with device that need to be charged.
- Press the CHECK Button to switch
on the USB charging.
- To keep USB socket away from
dust close the D-Tap output with
rubber protective cover.
RP-BP85D
Battery Pack Operating Instructions
Before operating the unit, please read this manual thoroughly and
retain it for future reference.
Important Safety Instructions
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
• Unplug this apparatus during lightning storms or when unused for
long periods of time.
• Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
Overview / Features
The RP-BP85D Battery Pack uses Lithium-Ion Battery Cells.
Use the RP-BP85D Battery Pack only with equipment whose
Operation Manual/Operating Instructions recommends its use.
Caution On charging
• The battery pack can be charged within a temperature range of 0°C
to 40°C (32°F to 104°F). However, we recommend charging within a
temperature range of 10°C to 30°C (50°F to 86°F) to ensure optimum
battery performance.
• The battery pack discharges naturally over time. To prolong the life of
the product, it is recommended that you fully charge the battery pack
before using it. For details on the charging procedure, refer to the
Operation Manual/Operating Instructions supplied with the battery
charger.
• The battery pack may become warm in use or while being charged.
This is normal.
You can use SONY original charger or REDPRO Dual Channel
charger RP-DC50 to charge the RP-BP85D Battery Pack.
If you want to know more about REDPRO Products please visit our
website:
www.red-pro.com
RP-BP85D
POWER METER
F
E
POWER METER - LED Indicator
USB 5V , 1A Power Output
D-Tap 14.4V , 50W, 3.5A Power Output
SPECIFICATION:
Test / USB Button
LED Light Indicator
USB
CHECK
D-Tap
Battery type:
Lithium-ion Rechargeable Battery
Power meter:
4-level LED Power indicator
Maximum voltage:
16.4 V DC
Nominal voltage:
14.4 V DC
Battery
Capacity:
74.88 Wh
USB Output:
5V, 5W / 1A max
D-Tap DC Output:
14.4V, 50W / 3.5A max
Charging time:
approx. 200 minutes on RP-DC50
Operating temperature:
–20°C to +45°C (–4°F to +113°F)
Dimensions (w/h/d)
41.5 × 90.5 × 69.7 mm
Net Weight:
4
20
g
