Stage 4:
Hoops
If you’re curved pipe section (Hoops) are cut in half. (Fig 5)
Note:
Don’t separate taped sections (Hoop pairs) until ready to assemble each hoop.
Both section of the one hoop should be taped together with a sleeve already attached to one end. To
assemble place sleeved end into other marked or painted curved section and tek into place.
(Make sure
you leave enough space between tek screws for ridge spacer clamps and have the tek screws on
both end hoops facing inside the greenhouse)
(Fig 5)
Take the curved pipe section (hoop) and place onto these upright posts. (Fig 4) Your hoops are now in
position (fig 6).
(Fig 6)
