background image

US-2

HEZ2450S/HEZ3050S

SAFETY FIRST

Instructions contained in warnings within
this manual marked with a 

symbol

concern critical points which must be
taken into consideration to prevent
possible serious bodily injury, and for this
reason you are requested to read all such
instructions carefully and follow them
without fail.

WARNINGS IN THE MANUAL

This mark indicates instructions which must
be followed in order to prevent accidents
which could lead to serious bodily injury or
death.

This mark indicates instructions which must
be followed, or it leads to mechanical failure,
breakdown, or damage.

This mark indicates hints or directions useful
in the use of the product.

NOTE

IMPORTANT

WARNING

1. Parts location......................................................................3
2. Specifications .....................................................................3
3. Warning labels on the machine ..........................................4
4. Symbols on the machine ....................................................4
5. For safe operation ..............................................................5
6. Set up .................................................................................9
7. Fuel...................................................................................10
8. Operation..........................................................................12
9. Maintenance .....................................................................14

10. Storage .............................................................................17
11. Disposal............................................................................17
12. Troubleshooting guide ......................................................17

Contents

1. Read this stick edger Owner/Operator

Manual carefully. Be sure you
understand how to operate this unit
properly before you use it. Failure to do
so could result in serious injury.

2. Be sure to keep this manual handy so

that you may refer to it later whenever
any questions arise. Also note that you
are requested to contact the dealer from
whom you purchased the product for
assistance the event that you have any
questions which cannot be answered
herein.

3. Always be sure to include this manual

when selling, lending, or otherwise
transferring the ownership of this
product.

4. Do not lend or rent your machine

without the owner's manual.

5. Be sure that anyone using your unit

understands the infomation contained in
this manual.

6. Never let a child under 13 years old use

the machine. 

WARNING

Summary of Contents for STICK HEZ2450S




















Reviews:

Related manuals for STICK HEZ2450S