11
STRATO CHARGED ENGINE
GZ25N
Wave
Washer
Clutch Shoe
Arrow marks on the
upper surface
6. SERVICE GUIDE
6-2 Removing of Clunch Shoe
Remove the housing and plug cap.
Remove the spark plug and fit the stopper (4810-
96220) into the plug hole.
Remove clutch bolts (14mm Hex.) .
Remove the rotor nut (12mm Hex.).
Remove the rotor using the puller assy (2890-
96100). Apply 8mm puller bolts.
6-3 Mounting of Clutch Shoe
6-4 Removing of Rotor
Apply grease into the holes on the clutch shoe
before mounting the clutch.
Grease
:
Molybdenum grease
Clutch bolt fixing torque
:
50 80kg.cm(43-69in
.lbs
）
Stopper
Clutch Bolt (14mm Hex.)
Rotor Nut
Puller
Puller bolts
Rotor
17mm Hex.
Clutch Shoe
Grease
Caution:
Care for orientation of the wave washers and clutch
shoe.