21
Item
Description
Use
Article number
1
Removal tool for
the ball bearing
To remove ball bearings.
502 50 18-01
2
T-handle Torx,
T27
To loosen or remove Torx screws.
502 71 27-02
3
Carburetor ad-
justment tool
To adjust the idle speed screw on the carburetor.
501 60 02-03
4
Carburetor ad-
justment tool
To adjust the high speed needle and low speed needle on the carbu-
retor.
530 03 55-60
5
Removal tool for
the drive gear
To remove the drive gear.
505 38 13-08
6
Assembly pliers To repair the spark plug cable.
502 50 06-01
7
Piston stop
To stop the movement of the piston.
522 43 18-01
8
Test spark plug To do a spark test.
502 71 13-01
9
Fuel filter hook
To pull the fuel filter out of the fuel tank.
502 50 83-01
10
Removal tool for
the piston pin
To remove the piston pin.
505 38 17-05
11
Air gap gauge,
0.3 mm
To measure the distance between the flywheel and the ignition module. 502 51 34-02
12
Air gap gauge,
0.5 mm
To measure the electrode gap on the spark plug.
502 51 91-01
13
Crankshaft as-
sembly sleeve
To assemble the crankshaft.
577 90 21-01
14
Flywheel remov-
al tool
To remove the flywheel.
577 90 66-01
15
Piston assembly
tool
To assemble the piston.
502 50 70-01
16
Tachometer
To measure RPM.
502 71 14-01
17
Pressure tester To do a pressure test.
531 03 06-23
18
Grease
To lubricate the gear housing.
503 98 96-03
19
Detergent
To clean the air filter.
505 69 85-70
20
Air filter oil
To lubricate the air filter.
531 00 60-76
21
UL 21 spray
To lubricate the cutting unit.
544 14 21-01
1351 - 002 - 25.11.2020
Servicing tools - 11