Application
The Programming Module is a USB communications interface which is used along with the detachable PGM Programming Display to
configure or document and backup/ restore configurations of selected Red Lion programmable devices in Adaptor Mode.
Adaptor Mode
•
The PGMMOD02 is a handheld device that can operate as an adapter between the detachable PGM Programming Display
(PGMMOD00) and the IAMA. This allows for configuration and monitoring of process parameters of the IAMA.
•
Note for connection to an IAMA, the USB-B to a 2.5 mm jack cable must be used.
•
By pressing the power button, the PGMMOD02 will power on, and show the status of the attached IAMA device on the PGMMOD.
•
If the IAMA is powered, the PGMMOD display will indicate the process variable or can be manually set to go into program mode.
•
If the IAMA is not powered the PGMMOD display will be in program mode only.
•
Indication of battery level is displayed via the LEDs. This can be activated by using the Power/Wake-up button. If while pressing
the Power/Wake-up button the LEDs are off, or only one LED is lit, the batteries should be exchanged. To extend battery life the
PGMMOD02 will automatically detect if it is not in use, and will consequently shut itself down to conserve battery power.
•
Battery life in Adaptor Mode is approximately 1 year of daily use, depending upon battery type.
Connection of Programming Module to a Device
6 LP1098
Summary of Contents for PGMMOD02
Page 2: ...2 LP1098 ...
