N-Tron® Series 1000 Hardware Guide
2-17
Installation
Revised 2016-08-30
Drawing No. LP1001
Section 2 Installation
Introduction
This sections contains the information and procedures necessary to unpack, inspect, install and connect the
N-Tron® Series 1000 equipment.
Unpacking
Remove all the equipment from the packaging, and store the packaging in a safe place.
Inspection
Please ensure the shipping package contains the following items in undamaged condition:
1.
N-Tron® Series 1000 Media Converter or Ethernet Switch.
2.
Product CD.
If the package contents are damaged:
1.
Contact your carrier.
2.
File any damage claims with the carrier.
Installing/Mounting
Read the following warning before beginning the installation:
Lire l'avertissement suivant avant de commencer l'installation:
WARNING:
Never install or work on electrical equipment or cabling during periods of lightning
activity. Never connect or disconnect power when hazardous gases are present.
ALERTE:
Ne jamais installer ou de travailler sur un équipement électrique ou de câblage pendant
les périodes d'activité de la foudre. Ne jamais brancher ou débrancher l'alimentation en gaz
dangereux sont présents
