7
Current system mode (Heat, Cool, Dry, Fan, Auto,
Off) is displayed on the controller home screen.
The mode that’s currently running (Heat or Cool) is
displayed in the upper-left corner of the controller
home screen.
To cycle through the available modes, touch
Mode
on the controller home screen, and select the
appropriate mode for your desired temperature.
•
Heat:
Enjoy warm air at your desired temperature.
•
Cool:
Enjoy cool air at your desired temperature.
•
Dry:
Dehumidify your room. The room may be
cooled slightly. Temperature may not be settable
during DRY mode depending on your equipment.
•
Fan:
Circulate the air in your room.
•
*Auto (Auto change over):
The unit selects
the operation mode according to the difference
between the room temperature and the set temperature. During
Auto
mode, the unit
changes mode (
Cool
Ö
Heat
) when the room temperature is about 4 °F (2 °C) away
from the set temperature for more than 15 minutes.
•
Off:
Turns the heating, cooling, and fan systems of indoor unit off.
Notes:
• To set your temperature preferences in
Auto
mode, see page 6.
•
Auto
mode is not recommended if this indoor unit is connected to a MXZ type
outdoor unit. When several indoor units are operated simultaneously, the unit may
not be able to switch operation mode between
Cool
and
Heat
. In this case, the
indoor unit goes into standby mode. (Refer to table of operation indicator lamp.)
•
Auto
mode may not appear on the controller screen depending on your
equipment and how your controller was installed.
Selecting System Mode
Heat
Auto
Vane
Leave
Return
Cool
Auto
Vane
Leave
Return
33-00447EFS_B.indd 7
10/17/2019 3:22:52 PM
