RDL-3000
RMC/E/F MODULE
PRODUCT MANUAL
70-00184-03-02
Proprietary Redline Communications © 2013
Page
9
of 50
April 30, 2013
4
Final Product Requirements
The following requirements apply to all final products incorporating an RDL-3000-RMC,
RDL-3000-RME, or RDL-3000-RMF module.
4.1 RDL-3000-RMC
4.1.1 RDL-3000-RMC Frequency Bands
Operation of the final product requires a software 'key' that is available exclusively from
Redline. This key restricts device operation to the FCC/IC 4940-4990 MHz, 5250-5350
MHz, 5470-5725 MHz, or 5725-5850 MHz band. The professional installer and operator
can not modify or otherwise circumvent these operational restrictions.
4.1.2 RDL-3000-RMC Antenna Use and Transmit Power
The RDL-3000-RMC module supports operation with 2x2 MIMO antenna systems with
two transmit chains and two receive chains. The RDL-3000-RMC module must be used
only with certified antennas and using the channel size and output power level specified
by the FCC/IC regulations.
4.1.3 RDL-3000-RMC Certified Antennas
This device has been designed to operate with the antennas listed in the following table.
Any additional antennas will be used only after authorization is obtained through Class II
permissive change.
Table 1: Approved Antennas
Manufacturer
Part #
Gain (dBi)
Frequency Range
Redline
A3FT3204LTPD
32
4900-5875 MHz
Redline
30-00328-00
19
4900-5875 MHz
L-Com
HG5158DP-10U
10
5100-5800 MHz