RDL-3000-RMC/E/F
PRODUCT MANUAL
70-00184-03-02
Proprietary Redline Communications © 2013
Page
48
of 50
April 30, 2013
5.2.2 RDL-3000-RME
Deployment in Canada
This Class B Digital apparatus meets all the requirements of the Canadian Interference-
Causing Equipment.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The following notices about deployment in Canada are included in training and
documentation provided to professional installers and operators of the final product:
1.
The final product must be professionally installed.
2.
WARNING -- IC RF Exposure Warnings
To satisfy IC RF exposure requirements for RF transmitting devices, the following
distances should be maintained between the antenna of this device and persons
during device operation:
Table 81: IC:
RDL-3000-RME/F
Recommended Safe Distances
Frequency (MHz)
Deployment
Separation Distance
2305-2320
2345-2360
PMP
85 cm (33.5") or more
To ensure compliance, operation at closer than these distances is not
recommended. The antenna used for this transmitter must not be collocated in
conjunction with any other antenna or transmitter.
The RDL-3000-RME has been designed to operate with an antenna having a maximum
gain of 17 dBi. Antenna having a higher gain is strictly prohibited per regulations of
Industry Canada. The required antenna impedance is 50 ohms.
This device has been designed to ensure that radio frequency emissions are maintained
within the band of operation under all normal operating conditions listed in this manual.
IC regulations governing operation in the 2305-2320 MHz and 2345-2360 MHz bands
are subject to licensing, pursuant to subsection 4(1) of the Radiocommunication Act.
This equipment complies to RSS-195 in the frequency band 2305-2320 MHz and 2345-
2360 MHz bands.
Déploiement aux le Canada
Cet appareil Digitale de Classe B rencontre toutes les normes du Canadian Règlement
Brouilleur Équipement.
Les avis suivants à propos du déploiement au Canada sont inclus dans la formation et la
documentation fournies aux installateurs professionnels et les opérateurs du produit
final:
3.
Le produit final doit être installé par un professionnel.
4.
AVERTISSEMENT - IC avertissements d'exposition RF
Pour satisfaire les exigences
d’IC en ce qui a trait aux expositions aux RF pour RF
dispositifs de transmission, les distances suivantes doit être maintenue entre
l'antenne de ce dispositif et des personnes pendant le fonctionnement du dispositif:
Table 82
:
IC:
RDL-3000-RME/F distances de sécurité recommandées
Fréquence (MHz)
Déploiement
Distance de Séparation
2305-2320
2345-2360
PMP
85 cm (33.5") ou plus